120M Motor Grader

The 120M motor grader represents a revolution in operational efficiency, visibility, service ease and overall productivity, setting the new standard and building on the legacy of high quality you can trust.

Download specification sheet

Overview and Specifications

Tandems
Height	19.76 in / 502 mm
Width	6.76 in / 171.7 mm
Sidewall thickness - inner	.5 in / 14 mm
Sidewall thickness - outer	.6 in / 16 mm
Drive chain pitch	1.8 in / 44.5 mm
Wheel axle spacing	59.5 in / 1510 mm
Tandem oscillation - front down	25°
Tandem oscillation - front up	15°

Moldboard
Blade width	12 ft / 3.7 m
Moldboard - height	24 in / 610 mm
Moldboard - thickness	.87 in / 22 mm
Throat clearance	4.9 in / 123.9 mm
Cutting edge - thickness	.6 in / 16 mm
End Bit - width	6 in / 152.4 mm
Blade Pull - max GVW	25540 lb / 11585 kg
Down Pressure - max GVW	28887 lb / 13103 kg
Down Pressure - base GVW	14581 lb / 6614 kg
Arc radius	16.3 in / 413 mm
Cutting edge - width	6 in / 152.4 mm
Blade Pull - max GVW (AWD)	40221 lb / 18244 kg
Blade Pull - base GVW (AWD)	29312 lb / 13296 kg
End Bit - thickness	.6 in / 16 mm
Blade Pull - base GVW	20553 lb / 9323 kg

Service Refill
Cooling system	10.4 gal / 40 L
Engine Oil	4.1 gal / 15.5 L
Trans./Diff./Final Drives	13.2 gal / 50 L
Tandem housing (each)	16.9 gal / 61 L
Circle drive housing	1.8 gal / 7 L
Front wheel spindle bearing housing	.1 gal / .5 L
Hydraulic system - tank	15.9 gal / 60 L
Fuel Capacity	90 gal / 340 L

Hydraulic System
Maximum system pressure	3500 psi / 24100 kPa
Standby Pressure	450 psi / 3100 kPa
Pump output	40 gal/min / 151 L/min
Pump type	Variable piston
Circuit type	Electro-hydraulic load sensing, closed center

Frame
Drawbar - width	3 in / 76.2 mm
Drawbar - yoke bar thickness	.75 in / 19.1 mm
Drawbar - yoke bar thickness	.75 in / 19.1 mm
Drawbar - thickness	.4 in / 9.5 mm
Drawbar - thickness	.4 in / 9.5 mm
Circle - diameter	60.2 in / 1530 mm
Drawbar - height	6 in / 152 mm
Front axle - height to center	22.5 in / 572 mm
Circle - blade beam thickness	1.4 in / 35 mm
Front axle - total oscillation per side	32°
Front axle - wheel lean, left/right	18°

Power Train
Brakes - Service, surface area	3565 in2 / 23000 cm2
Brakes - Service	Multiple oil-disc
Brakes - Secondary	Dual circuit control system
Transmission	Direct drive, power shift, countershaft
Brakes - Parking	Multiple oil disc
Forward/Reverse Gears	8 Fwd / 6 Rev

All-Wheel Drive System (Optional)
Torque - max	10325 ft-lb / 13998 NÂ·m
Operational Gears - reverse	1 - 5
Operational Gears - forward	1 - 7
Pump Type	2 Variable piston
Motor Type	2 Infinitely variable axial piston

Operating Specifications
Fwd. 4th	6.5 mph / 10.5 km/h
Fwd. 3rd	4.75 mph / 7.6 km/h
Fwd. 2nd	3.3 mph / 5.3 km/h
Fwd. 1st	2.4 mph / 3.9 km/h
Rev. 6th	23.5 mph / 37.8 km/h
Rev. 5th	16.1 mph / 26 km/h
Rev. 4th	8.6 mph / 13.9 km/h
Rev. 3rd	5.6 mph / 8.9 km/h
Rev. 2nd	3.8 mph / 6.2 km/h
Rev. 1st	2 mph / 3.3 km/h
Top Speed - Fwd.	27.7 mph / 44.5 km/h
Top Speed - Rev.	23.5 mph / 37.8 km/h
Turning radius, outside front tires	24.5 ft / 7.5 m
Fwd. 8th	27.7 mph / 44.5 km/h
Fwd. 7th	19 mph / 30.6 km/h
Fwd. 6th	13.8 mph / 22.2 km/h
Fwd. 5th	10.2 mph / 16.4 km/h
Articulation angle - left/right	20°
Steering range - left/right	47.5°

Weights
Gross Vehicle Weight, max	44690 lb / 20271 kg
Gross Vehicle Wt, max - rear axle	28378 lb / 12872 kg
Gross Vehicle Weight - base	31069 lb / 14093 kg
Gross Vehicle Wt, base - rear axle	22836 lb / 10358 kg
Gross Vehicle Wt, max - front axle	16312 lb / 7399 kg
Gross Vehicle Wt, base - front axle	8233 lb / 3735 kg

Dimensions
Height - top of cab	129 in / 3278 mm
Length - front tire to rear of machine	334.1 in / 8488 mm
Width - outside front tires	97.7 in / 2481 mm
Length - counterweight to ripper	389.3 in / 9889 mm
Length - front axle to mid tandem	232.8 in / 5915 mm
Length - between tandem axles	59.5 in / 1511 mm
Length - front axle to moldboard	98.85 in / 2511 mm
Height - front axle center	22.5 in / 572 mm
Height to exhaust stack	112.4 in / 2855 mm
Height to top of cylinders	113.7 in / 2890 mm
Ground clearance at rear axle	13.6 in / 347 mm
Width - tire center lines	84.1 in / 2136 mm
Width - outside rear tires	97.7 in / 2481 mm

Engine
Displacement	403 in3 / 6.6 L
Bore	4.13 in / 105 mm
Stroke	4.92 in / 125 mm
Derating altitude	11500 ft / 3505 m
Base Power (all gears) Net	138 hp / 103 kW
Std - Ambient Capability	109 Â° F / 43 Â° C
Hi Ambient Capability	122 Â° F / 50 Â° C
Hi Ambient - Fan speed - max	1650 RPM
Std - Fan speed - max	1150 RPM
Number of cylinders	6
Speed @ rated power	2000 RPM
Hi Ambient - Fan speed - min	550 RPM
Std - Fan speed - min	550 RPM
Engine Model	C6.6 ACERT VHP

Blade Range
Circle centershift - right	25.8 in / 656 mm
Circle centershift - left	25.8 in / 656 mm
Moldboard sideshift - right	26 in / 660 mm
Moldboard sideshift - left	20.1 in / 510 mm
Maximum shoulder reach outside of tires - right	75 in / 1905 mm
Maximum shoulder reach outside of tires - left	68.6 in / 1742 mm
Maximum lift above ground	16.8 in / 427 mm
Maximum depth of cut	28.3 in / 720 mm
Blade tip range - backward	5°
Blade tip range - forward	40°
Maximum blade position angle	90°

Ripper
Ripping depth, maximum	16.8 in / 428 mm
Ripping depth, maximum	16.8 in / 428 mm
Penetration force	17740 lb / 8047 kg
Pryout force	20461 lb / 9281 kg
Machine length increase, beam raised	36.2 in / 919 mm
Ripper shank holders	5